Skip to content
All posts

Amply on Corbett Lunsford’s Home Performance Channel

On October 14, 2026, building scientist Corbett Lunsford published a full walkthrough of Amply on his Home Performance YouTube channel. Amply co-founder Eric Fitz scanned rooms live with an iPad Pro and built a 3D model of his home. He then walked through the Manual J report while Corbett asked the detailed questions his audience expects.

The video wasn’t sponsored. Corbett has used Amply on a few of his own projects, and after comparing it with other Manual J software on air, he says: “I like Amply the best.”

Corbett recently invited Amply co-founder Eric Fitz onto the channel to talk about what we're building and how it's different from traditional tools. We're honored to be featured.

 

Chapters

  • 0:32 How Amply started
  • 1:36 How Corbett met Amply
  • 3:20 iPad Pro and LiDAR vs. the traditional Manual J workflow
  • 6:09 Why Manual J inputs matter most
  • 7:14 Project setup and construction defaults
  • 10:32 Cavity and continuous insulation assemblies
  • 19:13 Scanning a room live
  • 25:04 Stitching rooms into a whole-house 3D model
  • 30:35 Working offline, on device
  • 31:08 Can homeowners use Amply?
  • 32:39 Cathedral ceilings and complex geometry
  • 35:41 The Manual J report and AED curves
  • 47:33 Blower door and ventilation inputs
  • 51:01 Placing equipment in augmented reality
  • 53:12 How Amply is different
  • 56:09 What’s next

What is Amply?

Amply is iPad software that lets HVAC contractors complete an ACCA-approved Manual J load calculation on site. A technician walks the home with an iPad Pro. LiDAR and the cameras build a 3D model room by room, detecting walls, windows, and doors, and the heating and cooling loads update in real time.

Measuring an existing home the traditional way takes two hours or more, and the full process can take four. Amply customers complete a Manual J for a 1,500 to 2,000 sq ft home in about 15 to 20 minutes.

Why we built Amply

Amply started as a whole-home electrification company. We designed HVAC, weatherization, solar, battery, and EV charging projects for homeowners. HVAC was by far the hardest part, and the existing tools forced contractors to choose between doing it fast and doing it right. We built Amply so they could do both.

Highlights from the conversation

Good inputs matter more than the final number. Eric sits on Manual J’s technical committee. When he reviews someone else’s Manual J, he scrutinizes the inputs, not the result: “garbage in, garbage out.”

Amply gives contractors a head start on those inputs. Entering an address pulls the home’s bedrooms, living area, and year built. These are a gut check, since tax records often miss basements and encapsulated attics. The year built and ZIP code then set starting assumptions for walls, attic, and windows, drawing on NREL’s ResStock data and our own. Those defaults are only a starting point. The contractor still has to get into the attic, check the windows, and adjust any surface that differs.

Insulation is calculated the way the wall is built. Amply computes a true assembly U-factor, including thermal bridging through studs. It handles cavity insulation, continuous exterior insulation, or both together.

Rooms stitch together into a whole-house model. A newer feature tracks where the iPad is in the building, so separate room scans join into one 3D layout. Corbett said he waited to make the video until this existed. His practical tip is to bring a strong light into dark attics, because the scan relies on the cameras as well as LiDAR.

Complex geometry stays complex. Cathedral ceilings and triangular attic walls are captured as they actually are, not simplified into rectangles. That keeps exposed surface areas accurate, and it keeps room volumes accurate too, which matters when interpreting a blower door test.

The report is built to review with the homeowner. Corbett pointed to ACCA’s residential quality installation checklist. Its first item is whether the contractor reviewed the load calculation and its assumptions with the homeowner. Amply’s report supports that review in three ways:

  • It shows heat gain curves (AED) for the whole house and for each room.
  • It flags any change to design conditions.
  • Its first three pages are laid out so contractors can quickly audit their own work.

As Eric put it, Manual J “is defining the problem. It is not defining the solution.”

Blower door and ventilation inputs. Infiltration can be entered directly as a CFM50 blower door result instead of a guessed tightness level. Unbalanced ventilation, such as an exhaust fan running 24/7, is modeled as the extra infiltration it creates.

How is Amply different from other Manual J software?

  • Geometry accuracy. Amply has been a market leader in LiDAR scanning, and you can adjust the model as needed.
  • Offline, on-device processing. Everything runs on the iPad, so it stays fast and works in homes with poor cell service. “Imagine you pull out your hammer and it says, ‘Sorry, you don’t have Wi-Fi.’”
  • Equipment placement in augmented reality. You can place an indoor head or other equipment in AR, so the homeowner and the install crew see the same plan.
  • Independence. Eric and co-founder Ed Smith have known each other for 25 years and have taken no private equity or venture capital.

What’s next for Amply?

We’re continuing to build tools that carry contractors from the load calculation through equipment selection and system design. Amply already estimates room-by-room CFMs. In the meantime, our free variable-capacity heat pump Manual S spreadsheet is available today.

Frequently asked questions

Can homeowners use Amply? There’s no consumer version yet. Amply is built for HVAC professionals.

How much does Amply cost? Amply is a month-to-month subscription at $200 per month and requires an iPad Pro.

Does Amply need an internet connection? No. Scanning and calculations run entirely on the device.

Is Amply’s Manual J ACCA-approved? Yes.

How Corbett and Amply know each other

Corbett keeps a free list of HVAC contractors who commit to Manual J, S, and D design. Before Amply’s software was ACCA-approved, Ed used that list to find our earliest beta testers. Corbett later joined Ed and Eric on Ep. 24 of The Heat Pump Podcast to talk about giving homeowners the building science knowledge they need.

Watch and listen